Journal of the European Optical Society - Rapid publications, Vol 9 (2014)

Reflection-based fibre-optic refractive index sensor using surface plasmon resonance

P. Hlubina, M. Kadulova, D. Ciprian, J. Sobota

Abstract


A reflection-based fibre-optic refractive index sensor using surface plasmon resonance (SPR) in a thin metal film sputtered on a bare core of a multimode optical fibre is presented. The sensing element of the SPR fibre-optic sensor is the core of a step-index optical fibre made of fused silica with a gold film double-sided sputtered on the whole core surface, including the core end face. Consequently, a terminated reflection-based sensing scheme to measure the refractive indices of liquids is realized. The sensing scheme uses a wavelength interrogation method and the refractive index of a liquid is sensed by measuring the position of the dip in the reflected spectral intensity distribution. As an example, the aqueous solutions of ethanol with refractive indices in a range from 1.333 to 1.363 are measured. In addition, the increase in the sensitivity of the SPR fibre-optic refractive index sensor with the decrease of the fibre sensing length is demonstrated.

© The Authors. All rights reserved. [DOI: 10.2971/jeos.2014.14033]

Full Text: PDF

Citation Details


Cite this article

References


E. Kretschmann, and H. Raether, ”Radiative decay of nonradiative surface plasmons excited by light,” Z. Naturforschung A23, 2135–2136 (1968).

A. Otto, ”Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection,” Z. Phys. 216, 398–410 (1968).

H. Raether, Surface Plasmons on Smooth and Rough Surfaces and on Gratings (Springer-Verlag, New York, 1988).

J. M. Pitarke, V. M. Silkin, E. V. Chulkov, and P. M. Echenique, ”Theory of surface plasmons and surface-plasmon polaritons,” Rep. Prog. Phys. 70, 1–87 (2007).

R. C. Jorgenson, and S. S. Yee, ”A fiber-optic chemical sensor based on surface plasmon resonance,” Sensor. Actuator. A-Phys. 12, 213–220 (1993).

R. C. Jorgenson, and S. S. Yee, ”Control of the dynamic range and sensitivity of a surface plasmon resonance based fiber optic sensor,” Sensor. Actuator. A-Phys. 43, 44–48 (1994).

H. Suzuki, M. Sugimoto, Y. Matsui, and J. Kondoh, ”Effects of gold film thickness on spectrum profile and sensitivity of a multimodeoptical- fiber SPR sensor,” Sensor. Actuator. B-Chem. 132, 26–33 (2008).

Y. Zhao, Z.-Q. Deng, and Q. Wang, ”Fiber optic SPR sensor for liquid concentration measurement,” Sensor. Actuator. B-Chem. 192, 229–233 (2014).

R. Slavík, J. Homola, J. ˇCtyrok´y, and E. Brynda, ”Novel spectral fiber optic sensor based on surface plasmon resonance,” Sensor. Actuator. B-Chem. 74, 106–111 (2001).

M. Mitsushio, K. Miyashita, and M. Higo, ”Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu, and Al,” Sensor. Actuator. A-Phys. 125, 296–303 (2006).

N. Rajan, S. Chand, and B. D. Gupta, ”Fabrication and characterization of a surface plasmon resonance based fiber-optic sensor for bittering component,” Sensor. Actuator. B-Chem. 115, 344–348 (2006).

N. Rajan, S. Chand, and B. D. Gupta, ”Surface plasmon resonance based fiber-optic sensor for the detection of pesticide,” Sensor. Actuator. B-Chem. 123, 661–666 (2007).

S. K. Srivastava, R. Verma, and B. D. Gupta, ”Surface plasmon resonance based fiber optic sensor for the detection of low water content in ethanol,” Sensor. Actuator. B-Chem. 153, 194–198 (2011).

P. Bhatia, and B. Gupta, ”Surface-plasmon resonance-based fiberoptic refractive index sensor: sensitivity enhancement,” Appl. Optics 50, 2032–2036 (2011).

D. Ciprian, and P. Hlubina, ”Theoretical model of the influence of oxide overlayer thickness on the performance of a surface plasmon fibre-optic sensor,” Meas. Sci. Technol. 24, 025105 (2013).

A. Hanning, J. Roeraade, J. J. Delrow, and R. C. Jorgenson, ”Enhanced sensitivity of wavelength modulated surface plasmon resonance devices using dispersion from a dye solution,” Sensor. Actuator. B-Chem. 54, 25–36 (1999).

R. K. Verma, and B. D. Gupta, ”Theoretical modeling of a bidimensional U-shaped surface plasmon resonance based fiber optic sensor for sensitivity enhancement,” J. Phys. D Appl. Phys. 41, 095106 (2008).

H.-Y. Lin, W.-H. Tsai, Y.-C. Tsao, and B.-C. Sheu, ”Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light,” Appl. Optics 46, 800–806 (2007).

F. J. Bueno, Ó. Esteban, N. Díaz-Herrera, M.-C. Navarrete, and A. González-Cano, ”Sensing properties of asymmetric doublelayer covered tapered fibers,” Appl. Optics 43, 1615–1620 (2004).

Ó. Esteban, N. Díaz-Herrera, M.-C. Navarrete, and A. González- Cano, ”Surface plasmon resonance sensors based on uniformwaist tapered fibers in a reflective configuration,” Appl. Optics 45, 7294–7298 (2006).

S. Lopez, I. del Villar, C. Ruiz Zamarreeno, M. Hernaez, F. J. Arregui, and I. R. Matias, ”Optical fiber refractometers based on indium tin oxide coatings fabricated by sputtering,” Opt. Lett. 37, 28–30 (2012).

M.-C. Navarrete, N. Díaz-Herrera, A. González-Cano, and Ó. Esteban, ”A polarization-independent SPR fiber sensor,” Plasmonics 5, 7–12 (2010).


Journal of the European Optical Society:Rapid publications - ISSN 1990-2573. JEOS:RP is subject to the EOS General Terms and Conditions.